For the 2009 Pontiac G8 GXP, Whiteline makes the Rear Control Arm Lower Rear Outer Bushing. Position: rear. The kit contains 8 bushings and 4 tubes. Trim named on the listing: GXP. Whiteline part number: W63430. Application note: Adds +/- 1.5 degrees Camber: replaces both control arm outer and trailing arm rear mount. It is listed for the Zeta chassis.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm”s pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. Working on the same car? We also list Rear Subframe Mount Bushing, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit for the Pontiac G8.
Features
Specifications
| Part Number | W63430 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009 Pontiac G8 GXP |
| Chassis Code | Zeta |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 36.9 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 1.5Degree Camber – replaces both control arm outer and trailing arm rear mount |


0.0 Average Rating Rated (0 Reviews)