This page covers the Whiteline Rear Control Arm Lower Rear Outer Bushing for the 2001-2003 Subaru Outback VDC. Part number W63394. The chassis code on the listing is BE/BH. In the box: 4 bushings and 2 tubes. Placement: rear. The listing names the VDC trim.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.
Features
Specifications
| Part Number | W63394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2001-2003 Subaru Outback VDC |
| Chassis Code | BE/BH |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 33.8 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)