This page covers the Whiteline Front Upper Control Arm Bushing Kit for the 2002-2003 Audi S6 Avant (C5). Whiteline part number: KCA420. The listing names the Avant trim. The kit contains 4 shell bushings and 4 tubes. Application note: Adds 0.5 degrees Camber. Position: front.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground.
Features
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2003 Audi S6 Avant |
| Chassis Code | C5 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


0.0 Average Rating Rated (0 Reviews)