For the 1988-1991 Honda CRX (EF), Whiteline makes the Front Upper and Lower Control Arm Bushing Kit. Placement: front. The kit contains 10 bushings, 6 tubes, and grease. Part number W56416.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as difficult and lists about 2 hours. An alignment is required after installation. To go with it on the Honda CRX, see Adjustable Rear Upper Control Arm Set, Front Sway Bar Link Kit, and Front Sway Bar Link Bushing (28.5mm OD).
Features
Specifications
| Part Number | W56416 |
| Part Name | Control Arm Bushings |
| Vehicle | 1988-1991 Honda CRX |
| Chassis Code | EF |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Length | 52 mm |
| Bushing 1 Outer Diameter | 33.2 mm |
| Bushing 2 Inner Diameter | 10.2 mm |
| Bushing 2 Length | 38 mm |
| Bushing 2 Outer Diameter | 29.5 mm |
| Bushing Quantity | 10 |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 10 Bushings, 6 Tubes, Grease |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)