Fitted to the 1998-2005 Subaru Impreza WRX RS (GC/GF/GD/GG): the Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.). It goes on the front of the vehicle. In the box: 4 bushings, 2 tubes, and 2 washers. Order it as part number W51710. Application note: Standard Replacement.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Impreza WRX RS: 14mm Adjustable Front Camber Bolts, 22mm Front Sway Bar, and Front and Rear Sway Bar Kit.
Features
Specifications
| Part Number | W51710 |
| Part Name | Control Arm Bushing |
| Vehicle | 1998-2005 Subaru Impreza WRX RS |
| Chassis Code | GC/GF/GD/GG |
| Bushing 1 Inner Diameter | 20.4 mm |
| Bushing 1 Length | 50.6 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing 2 Inner Diameter | 20.4 mm |
| Bushing 2 Length | 50.6 mm |
| Bushing 2 Outer Diameter | 56 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 4 |
| Color | Black |
| Durometer | 72 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Mounting Type | Press In |
| Outside Diameter | 56 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


0.0 Average Rating Rated (0 Reviews)