Whiteline_Front_Control_Arm_Lower_Inner_Rear_Bushing_Standard_Repl_for_1997_1999_Subaru_Legacy_Outback_Limited_BE_BH_1

Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) for 1997-1999 Subaru Legacy Outback Limited (BE/BH)

Category: SKU: LCK957781

$42.09 $140.29

0 reviews

For the 1997-1999 Subaru Legacy Outback Limited, Whiteline makes the Front Control Arm Lower Inner Rear Bushing (Standard Repl.). The part number is W51710. Chassis code: BE/BH. The listing names the Limited trim. Included: 4 bushings, 2 tubes, and 2 washers. Placement: front. Whiteline”s note for this fit: Standard Replacement.

Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.

Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. To go with it on the Legacy Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.

Features

  • Grease: Moly grease is supplied to prolong the life of the parts.
  • Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
  • Material: Made from polyurethane.
  • Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Easy to fit: Designed so the install needs no specialized skills or tools.
    • Specifications
    Part Number W51710
    Part Name Control Arm Bushing
    Vehicle 1997-1999 Subaru Legacy Outback Limited
    Chassis Code BE/BH
    Bushing 1 Inner Diameter 20.4 mm
    Bushing 1 Length 50.6 mm
    Bushing 1 Outer Diameter 56 mm
    Bushing 2 Inner Diameter 20.4 mm
    Bushing 2 Length 50.6 mm
    Bushing 2 Outer Diameter 56 mm
    Bushing Color Black
    Bushing Material Polyurethane
    Bushing Quantity 4
    Color Black
    Durometer 72
    Grade Type Regular
    Grease Fitting Included No
    Installation Difficulty Difficult
    Installation Time (hrs) 2.5
    Kit Contents 4 Bushings, 2 Tubes, 2 Washers
    Material Polyurethane
    Mounting Hardware Included No
    Mounting Type Press In
    Outside Diameter 56 mm
    Universal or Specific Fit Specific Fit
    Vehicle Placement Front
    Wheel Alignment Required Yes
    Notes Standard Replacement
    Vehicle Fitment
  • 1997 Subaru Legacy Outback Limited (BE/BH)
  • 1998 Subaru Legacy Outback Limited (BE/BH)
  • 1999 Subaru Legacy Outback Limited (BE/BH)

    • 0.0 Average Rating Rated (0 Reviews)

    Rated
    0%
    Rated
    0%
    Rated
    0%
    Rated
    0%
    Rated
    0%

    Be the first to review “Whiteline Front Control Arm Lower Inner Rear Bushing (Standard Repl.) for 1997-1999 Subaru Legacy Outback Limited (BE/BH)”

    Your email address will not be published. Required fields are marked *

    You have to login to add images.

    Related products

    More Products