Looking for a front control arm bushing for your 1991-1994 Subaru Legacy Sport? The Whiteline Front Control Arm Lower Inner Rear Bushing is made for it. It goes on the front of the vehicle. The kit contains 2 housings, 2 washers, and 2 nuts. Whiteline”s note for this fit: Adds 0.5 degrees Caster & Anti-Lift. The part number is KCA319A. The listing names the Sport trim. The chassis code on the listing is BC/BF.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. Working on the same car? We also list 14mm Adjustable Front Camber Bolts, Front Steering Rack And Pinion Mount Bushing, and Front Strut Tower Brace for the Legacy.
Features
Specifications
| Part Number | KCA319A |
| Part Name | Control Arm Bushing |
| Vehicle | 1991-1994 Subaru Legacy Sport |
| Chassis Code | BC/BF |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Length | 52.5 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 20 mm |
| Bushing 2 Length | 52.5 mm |
| Bushing 2 Outer Diameter | 39.5 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 2 Washers, 2 Nuts |
| Mounting Hardware Included | No |
| Outside Diameter | 39.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees Caster & Anti-Lift |


0.0 Average Rating Rated (0 Reviews)