Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster) is made for the 2010-2014 Audi A3 TDI. It is listed for the 8P/8V chassis. Application note: Adds +0.5 degrees Caster + Anti-Lift. The part number is KCA316. You receive 2 housings. The listing names the TDI trim. Placement: front.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Expect a difficult job of about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Audi A3: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
Specifications
| Part Number | KCA316 |
| Part Name | Control Arm Bushing |
| Vehicle | 2010-2014 Audi A3 TDI |
| Chassis Code | 8P/8V |
| Bushing 1 Inner Diameter | 18.8 mm |
| Bushing 1 Length | 39.5 mm |
| Bushing 1 Outer Diameter | 29 mm |
| Bushing 2 Inner Diameter | 29 mm |
| Bushing 2 Length | 55 mm |
| Bushing 2 Outer Diameter | 65.7 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Color | Gold |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Housings |
| Material | 6061-T6 Billet Aluminum |
| Mounting Hardware Included | No |
| Outside Diameter | 29 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degree Caster + Anti-Lift |


0.0 Average Rating Rated (0 Reviews)