Made for the 2019 Toyota 86 (ZN6), the Whiteline Adjustable Front Sway Bar Link firms up the connection between the sway bar and the suspension. A Toyota 86 of this vintage has typically covered a lot of ground by now, and fitting this part is a good way to tighten the car up before wear sets in.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
It applies to the 2019 model year of the Toyota 86 on the ZN6 chassis. The listing names the TRD Special Edition version. You receive 2 links and 8 washers. Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Toyota 86: Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Rear Subframe Mount Bushing.
Features
Specifications
| Part Number | KLC219 |
| Part Name | Sway Bar Link |
| Vehicle | 2019 Toyota 86 TRD Special Edition |
| Chassis Code | ZN6 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 washers |
| Length | 150-175 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits vehicles with aftermarket coilovers. Adjustable Extra Heavy Duty. Length 150-175mm. Bolt Diameter 12mm. |


0.0 Average Rating Rated (0 Reviews)