Made for the 2017-2020 Toyota 86 (ZN6), the Whiteline Adjustable Front Sway Bar Link firms up the connection between the sway bar and the suspension. At 6 years old at most, these cars are not worn out, but this is a popular point to sharpen the handling with firmer, more precise parts.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
It applies to 4 model years, 2017 through 2020, of the Toyota 86 on the ZN6 chassis. The listing names the Base version. In the box: 2 links and 8 washers. Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Toyota 86, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
Specifications
| Part Number | KLC219 |
| Part Name | Sway Bar Link |
| Vehicle | 2017-2020 Toyota 86 Base |
| Chassis Code | ZN6 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 washers |
| Length | 150-175 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits vehicles with aftermarket coilovers. Adjustable Extra Heavy Duty. Length 150-175mm. Bolt Diameter 12mm. |


0.0 Average Rating Rated (0 Reviews)