Looking for a front sway bar link for your 2011-2016 Hyundai Genesis Coupe (BH/DH)? The Whiteline Adjustable Front Sway Bar Link is built to fit it. At 10 years old for the newest Genesis Coupe in this range, the original rubber has seen a lot of heat cycles and miles, so replacing it is a sensible refresh.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
This listing covers 6 model years, 2011 through 2016, of the Hyundai Genesis Coupe on the BH/DH chassis. The listing names the 3.8 R-Spec version. The kit contains 2 links and 8 washers. Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Genesis Coupe, see 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Heavy Duty Blade Adjustable 26mm Rear Sway Bar.
Features
Specifications
| Part Number | KLC201 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2016 Hyundai Genesis Coupe 3.8 R-Spec |
| Chassis Code | BH/DH |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 360-385 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Lowered vehicle applications with 12mm studs – Adjustable Extra Heavy Duty. Length 360-385mm. |


0.0 Average Rating Rated (0 Reviews)