The TEIN RX1 Coilover Kit for your 2010-2016 Suzuki Landy 2.0S, 2.0G FWD (SC26) is a performance-oriented, full-length adjustable suspension system that strikes an excellent balance between sportiness and daily comfort. It uses a twin-tube damper design that delivers long stroke and low repulsion force, improving ride quality over uneven surfaces. A Hydraulic Bump Stopper (H.B.S.) mechanism replaces conventional bump rubbers, converting hard impacts into thermal energy to reduce harsh rebound. The kit features 16-level damping adjustment for precise tuning of compression and rebound. Ride height is fully adjustable via a threaded lower seat, allowing you to lower or raise your car while maintaining damper travel. You also get camber-adjustable lower brackets, giving fine control over alignment by rotating eccentric washers.
Mounts are included – either reinforced rubber or pillow-ball, depending on the model – tailored to each application. Built with no-sag springs (SAE9254 steel) and durable TEIN-Green powder-coated bodies, it”s both durable and resistant to corrosion. The damper oil is specially formulated for high-performance use, offering stable viscosity across a wide temperature range and excellent anti-foaming properties. Plus, the RX1 is compatible with TEIN”s optional EDFC electronic damping controller, letting you adjust damping from inside the car for even more tuning flexibility.
Standard Features
Specifications
| Part Number | VSK28-M1AS3 |
| Part Name | RX1 Coilovers |
| Vehicle | 2010-2016 Suzuki Landy 2.0S, 2.0G FWD |
| Chassis Code | SC26 |
| Engine | 2000 |
| Ride-Height Adjustable – Front | Yes |
| Ride-Height Adjustable – Rear | Yes |
| Damping Adjustment | 1-Way |
| Damping Adjustment – Front | Yes |
| Damping Adjustment – Rear | Yes |
| Upper Mount – Front | Reinforced Rubber |
| Upper Mount – Rear | OEM |
| Recommended Ride Height – Front | -2 in. |
| Recommended Ride Height – Rear | -1.6 in. |
| Ride-Height Adjustable Range – Front | -3.5 to -1.1 in. |
| Ride-Height Adjustable Range – Rear | -2.5 to -0.9 in. |
| Recommended Ride-Height Adjustable Range – Front | -2.4 to -1.6 in. |
| Recommended Ride-Height Adjustable Range – Rear | -2 to -1.2 in. |
| Spring Rate – Front | 5 kgf/mm (280 lbs/in) |
| Spring Rate – Rear | 7 kgf/mm (392 lbs/in) |
| Spring Free Length – Front | 225 mm |
| Spring Free Length – Rear | 165 mm |
| Quantity | Full Set (Front & Rear) |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)