RDS 69 Gallon Rectangular Transfer Tanks Bright Aluminum 57X18X16 Model # 70326
The RDS transfer tank is designed for transferring diesel fuel, gasoline or aviation fuel from the bed of a pickup to automobiles, heavy equipment, boats, 4-wheelers, generators, and other equipment.
This DOT approved aluminum transfer tank will not rust or corrode and the heavy duty design will ensure years of hassle free use. With the addition of a pump, this tank can be used for fueling equipment but can also be used as an auxiliary tank to supply additional capacity to the main fuel tank on your truck.
It is the user’s responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging of tank contents.
Warning: Proper Use of Transfer Tanks
To ensure safety and optimal performance, do not fill your transfer tank to 100% capacity. Transfer tanks require sufficient headspace to allow for fuel expansion and vapor buildup. Overfilling the tank can lead to:
Fuel Leaks: Excess fuel may escape through vents or seals, posing safety and environmental risks.
Increased Pressure: Without adequate space for vapor, pressure buildup can damage the tank or connected systems.
Compliance Issues: Overfilled tanks may violate local or federal regulations for fuel transport.
Safe Filling Recommendations
Fill the tank to 90% of its capacity to allow room for fuel expansion.
Use proper venting systems and check all connections for leaks before transport.
Follow all local, state, and federal guidelines for the storage and transport of fuel.
By adhering to these precautions, you can ensure the safe and reliable use of your transfer tank while protecting your vehicle, environment, and compliance with regulations.
If you have any questions about proper usage or tank specifications, “”
Specifications
Proudly made right here in the USA
Tanks come with a 2″” female pipe thread coupling for manual or 12V transfer pump (not included)
No-Rust Aluminum Tank can be used to transport diesel, gasoline, or aviation fuel
DOT Approved Tank with 1/8” heavy-duty aluminum construction
Fully welded seams guarantee years of use with no leaks
100% pressure tested by manufacturer for safety
3/16” heavy duty aluminum mounting brackets on both sides of the tank
Built-in baffles reduce sloshing
Locking fill cap
Rollover valve (pressure relief vent)
Includes 3/8” FTP drain plug that can be used to supply additional capacity to the main fuel tank of your truck.
Includes sending unit/fuel level gauge mounting location with block off plate.
Includes 3/8″” pickup and return couplings if needed.
Comes with manufacturers complete warranty.
0.0 Average Rating Rated (0 Reviews)