Free Shipping Over $59.99!
QA1 MOD Series Level 3 Full Vehicle Handling Kit and Axle with Narrowed 9 in. Housing – 1970-1974 Chevrolet Camaro
$999.99 $10,978.95
QA1”s Handling Kit is the premier suspension upgrade for the 1970-1974 Chevrolet Camaro owners seeking exceptional handling. This kit replaces the Front and Rear Suspension with QA1 MOD series 4-way adjustable coilovers and a narrowed QA1 9″” rear housing, and four-link optimized for wider wheels and tires. HUGE HANDLING GAINS Experience superior handling with lightweight Control Arms that improve geometry and reduce flex. The adjustable four-link design eliminates wheel hop and improves traction and handling. Front and Rear Sway Bars and subframe connectors minimize roll in tight corners. AGGRESSIVE STANCE Factory springs limit stance, but QA1”s MOD series coilovers and 4-link offer 2 inches of front adjustability and 1.25 inches in the rear for ideal ride height. The kit allows for massive 12-inch-wide wheels with 335 tires. PERFORMANCE 9″” REAR HOUSING Strength: Fabricated center section with 3 OD, wall axle tubes support 800HP and 31 spline axles are rated to 650HP. Features: Standard options include powder coat, drain and fill plugs, jack pad, and all necessary hardware. Specs: Narrowed wheel mounting width: 56-1/8 (narrowed 2-1/2 per side for mini tubs) Big Ford New Style Torino Axle Flanges with 2.5 axle offset Bolt pattern: 5×4-3/4 for easy wheel compatibility Wheel studs: x 3 for alloy wheels Requires third member for Ford 9 housings with 31 spline axles EASY INSTALL The QA1 Handling Kit features a straightforward installation. The rear crossmember needs minimal MIG welding, and all other components are direct bolt-in. MADE IN THE USA Components manufactured in the USA
Standard Features
Specifications
| Part Number | HK43-GMF2RN |
| Part Name | Handling Suspension Kit |
| UPC | 806990065285 |
| Vehicle | 1970-1974 Chevrolet Camaro |
| Front Coil Springs Included | Yes |
| Rear Coil Springs Included | Yes |
| Rear Leaf Springs Included | No |
| Front Shocks/Struts Included | Yes |
| Front Shock Type | Double Adjustable Coilover |
| Rear Shocks/Struts Included | Yes |
| Rear Shock Type | Double Adjustable Coilover |
| Front Sway Bar Included | Yes |
| Front Sway Bar Color | Black |
| Front Sway Bar Type | Hollow |
| Front Sway Bar Diameter | 1.375 in. |
| Rear Sway Bar Included | Yes |
| Rear Sway Bar Color | Black |
| Rear Sway Bar Diameter | 0.875 in. |
| Tie Rod Sleeves Included | Yes |
| End Link Bushings Included | Yes |
| Rear Leaf Spring Bushings Included | No |
| Sway Bar Bushings Included | Yes |
| Upper Trailing Arms Included | No |
| Lower Trailing Arms Included | No |
| Trailing Arm Mount Braces Included | No |
| Panhard Bar Included | No |
| Torque Arm Included | No |
| Upper Control Arms Included | Yes |
| Lower Control Arms Included | Yes |
| Control Arm Style | Tubular |
| Control Arm Material | Steel |
| Control Arm Color | Black |
| Front Strut Tower Bar Included | No |
| K-Member Included | No |
| K-Member Support Brace Included | No |
| Rear Strut Tower Bar Included | No |
| Subframe Connectors Included | Yes |
| Chassis Stiffener Included | No |
| Calipers Included | No |
| Rotors Included | No |
| Brake Pads Included | No |
| Brake Lines Included | No |
| Wheel Studs Included | No |
| Center Link Included | No |
| Spindles Included | No |
| Inner Tie Rod Ends Included | No |
| Outer Tie Rod Ends Included | No |
| Mounting Hardware Included | Yes |
| Spring Rate – Front | 450 lbs/in |
| Spring Rate – Rear | 170 lbs/in |
| Notes | – |
Vehicle Fitment
Related products
More Products-
Yellow Speed Super Low Coilovers for 2013-2020 Subaru BRZ (ZC6)
$237.80$1,189.00 -
Yellow Speed Super Low Coilovers for 2011-2019 BMW 1 Series (F20/F21)
$237.80$1,189.00 -
Yellow Speed Super Low Coilovers for 1993-2001 Subaru Impreza WRX (GM6)
$237.80$1,189.00 -
Yellow Speed Super Low Coilovers for 1999-2005 Mazda MX-5 (NB8B)
$237.80$1,189.00
0.0 Average Rating Rated (0 Reviews)