Here is the Whiteline Front Control Arm Lower Inner Front Bushing for the 1988-1989 Toyota Corolla GTS. It is listed for the E90 chassis. In the box: 4 bushings and 2 tubes. It goes on the front of the vehicle. Order it as part number W51724. Trim named on the listing: GTS.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Corolla: Adjustable Rear Sway Bar Link, 12mm Adjustable Front Camber Bolts, and Front Sway Bar Washer Kit.
Features
Specifications
| Part Number | W51724 |
| Part Name | Control Arm Bushing |
| Vehicle | 1988-1989 Toyota Corolla GTS |
| Chassis Code | E90 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 33 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)