RKI Chest Truck Tool Box M-Series White Steel Model MTB60-1NM
Hull of the box is constructed of 14 gauge cold rolled steel
Bottom of the box is constructed of 14 gauge cold rolled steel, and fully welded on all 4 sides.
Lid is constructed of 14 gauge cold rolled steel with a 14 gauge cold rolled steel inner stiffener.
Welds are full arc welds, no spot welds
Full size, stainless steel paddle latches are recessed into the hull of the box and synchronized to allow opening or locking from either side of the vehicle
Two keys are furnished per box
Two spring type lid props assist in the opening and closing of the lid
Lid is attached to the hull of the box with two 4″” stainless steel butt hinges
Hinges are welded to the box and lid
Offset in the rear of the lid is to allow flush mounting to the front of the pickup box
Lower front face of the box is diagonally tapered to accommodate wheel wells on short bed trucks
Ribbed D-Bulb seal is installed in the lid to seal against the flange around the box opening
Box goes through a five-stage state-of-the art metal pretreatment anti-corrosion protection system and is finished with a super durable white polyester powder coat
Mounting hardware and mounting instructions included
Specifications
| Length: |
60 “” |
| Overall Length: |
60 3/4 “” |
| Overall Depth: |
24 3/16 “” |
| Width: |
23 “” |
| Material: |
Steel |
| Number of Lids: |
1 |
| Approximate Weight: |
182 lbs. |
0.0 Average Rating Rated (0 Reviews)