For the 2006-2009 Subaru Legacy 2.5i, GT spec.B (BL/BP/BM/BR), Whiteline makes the Rear Toe Arm Inner Bushing. Trims named on the listing: 2.5i and GT spec.B. The kit contains 2 bushings and 2 tubes. Position: rear. Part number W63392.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired toe arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 2 hours. Get the car aligned once it is back on the ground. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
Specifications
| Part Number | W63392 |
| Part Name | Toe Arm Bushing |
| Vehicle | 2006-2009 Subaru Legacy 2.5i, GT spec.B |
| Chassis Code | BL/BP/BM/BR |
| Bushing Color | Black |
| Bushing Inside Diameter | 12.2 mm |
| Bushing Length | 48 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 35.1 mm |
| Bushing Quantity | 2 |
| Durometer | 85 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | Yes |
| Hardware Included | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)