The Whiteline Rear Sway Bar Link fits the 2005-2009 Land Rover LR3 HSE (L319). The part number is KLC180-115. Whiteline”s note for this fit: Adjustable Extra Heavy Duty. Placement: rear. The kit contains 2 links. Trim named on the listing: HSE.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Land Rover LR3: Front Control Arm Lower Inner Front Bushing and Rear Control Arm Lower Front Bushing.
Features
Specifications
| Part Number | KLC180-115 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2009 Land Rover LR3 HSE |
| Chassis Code | L319 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 12mm. |


0.0 Average Rating Rated (0 Reviews)