Whiteline Adjustable Rear Sway Bar Link for 2000-2001 Honda CR-V SE (RD1)

Category: SKU: LCK959373

$50.73 $169.09

0 reviews

Made to fit the 2000-2001 Honda CR-V SE, the Adjustable Rear Sway Bar Link from Whiteline. Placement: rear. You receive 2 links. Order it as part number KLC174. Whiteline”s note for this fit: Adjustable Extra Heavy Duty. Chassis code: RD1. The listing names the SE trim.

A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.

Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. Working on the same car? We also list Adjustable Rear Upper Control Arm Set, Front Sway Bar Washer Kit, and Rear Control Arm Lower Rear Inner Bushing for the CR-V.

Features

  • Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
  • Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
  • Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
  • Construction: High-strength alloy gives the strength needed without much weight.
  • Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
  • Install guide: Instructions for fitting are packed in the box.
  • Specifications
    Part Number KLC174
    Part Name Sway Bar Link
    Vehicle 2000-2001 Honda CR-V SE
    Chassis Code RD1
    Adjustable Yes
    Bolt Thread Diameter 10 mm
    Grade Type Performance
    Grease Fitting Included No
    Greaseable No
    Installation Difficulty Moderate
    Installation Time (hrs) 1
    Kit Contents 2 Links
    Length 130-155 mm
    Locking Nuts Included Yes
    Material Aluminum Alloy
    Pre-Greased No
    Washers Included Yes
    Vehicle Placement Rear
    Wheel Alignment Required No
    Notes Adjustable Extra Heavy Duty. Length 130-155mm. Bolt Diameter 10mm.
    Vehicle Fitment
  • 2000 Honda CR-V SE (RD1)
  • 2001 Honda CR-V SE (RD1)
  • 0.0 Average Rating Rated (0 Reviews)

    Rated
    0%
    Rated
    0%
    Rated
    0%
    Rated
    0%
    Rated
    0%

    Be the first to review “Whiteline Adjustable Rear Sway Bar Link for 2000-2001 Honda CR-V SE (RD1)”

    Your email address will not be published. Required fields are marked *

    You have to login to add images.