Here is the Whiteline Rear Control Arm Lower Front Inner and Outer Bushing for the 1999-2004 Subaru Legacy L (BE/BH/BL/BP). Trim named on the listing: L. This part is for the rear of the vehicle. Order it as part number W63393. Included: 4 shell bushings and 4 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
Specifications
| Part Number | W63393 |
| Part Name | Control Arm Bushing |
| Vehicle | 1999-2004 Subaru Legacy L |
| Chassis Code | BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | – |


0.0 Average Rating Rated (0 Reviews)