Whiteline Front Sway Bar Link is made for the 2008 Chevrolet Corvette 427 Limited Edition Z06. It is listed for the C6 chassis. Whiteline”s note for this fit: Adjustable Extra Heavy Duty. It goes on the front of the vehicle. The listing names the 427 Limited Edition Z06 trim. In the box: 2 links. Part number KLC110.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. Working on the same car? We also list Rear Sway Bar Link for the Corvette.
Features
Specifications
| Part Number | KLC110 |
| Part Name | Sway Bar Link |
| Vehicle | 2008 Chevrolet Corvette 427 Limited Edition Z06 |
| Chassis Code | C6 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt diameter 12mm. |


0.0 Average Rating Rated (0 Reviews)