Whiteline built the Adjustable Front Sway Bar Link Adjustable for the 2014-2019 Toyota Corolla (E170/E180). A Corolla of this vintage has typically covered a lot of ground by now, and fitting this part is a good way to tighten the car up before wear sets in.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
This listing covers 6 model years, 2014 through 2019, of the Toyota Corolla on the E170/E180 chassis. The kit contains 2 links. Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Other Whiteline parts we list for the Corolla: 17mm Adjustable Front Camber Bolts.
Features
Specifications
| Part Number | KLC169 |
| Part Name | Sway Bar Link |
| Vehicle | 2014-2019 Toyota Corolla |
| Chassis Code | E170/E180 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 270-295mm. Bolt Diameter 10mm. |


0.0 Average Rating Rated (0 Reviews)