The TEIN 4×4 Damper Sport Coilover Kit for your 2003-2009 Toyota 4Runner RWD (N210) is a rugged, lift-capable suspension solution built for off-road and 4WD applications. It uses a twin-tube damper design that delivers a long stroke and smooth ride, even on rough terrain. The lower spring seats are height-adjustable, offering about +40 mm (~1.5 in) of lift over stock. At the heart of the system is TEIN”s patented H.B.S. (Hydraulic Bump Stopper) mechanism: instead of a traditional rubber bump stop, the H.B.S. converts hard impacts into thermal energy, reducing rebound harshness and improving control, especially when the vehicle is fully loaded. The shocks feature 16-stage damping adjustment (for both compression and rebound), allowing fine-tuning of ride comfort and handling. The springs are made of high-strength SAE9254 steel to resist sag, and are coated with a durable, rust-resistant powder finish.
The damper bodies are also powder-coated in TEIN-green for corrosion protection. Inside, TEIN uses a high-performance damper oil that resists foaming and maintains stable viscosity across a wide temperature range, so damping stays consistent in various driving conditions. Together, these features make the 4?ù4 Damper Sport Coilover Kit a balanced choice for drivers who need both lift and dependable performance on rugged terrain – combining durability, adjustability, and comfort in one package.
Standard Features
Specifications
| Part Number | VSBNN-F1SA2 |
| Part Name | 4×4 Damper Sport Coilovers |
| Vehicle | 2003-2009 Toyota 4Runner RWD |
| Chassis Code | N210 |
| Engine | 4000 |
| Ride-Height Adjustable – Front | No |
| Ride-Height Adjustable – Rear | No |
| Damping Adjustment | 1-Way |
| Damping Adjustment – Front | Yes |
| Damping Adjustment – Rear | Yes |
| Upper Mount – Front | OEM |
| Upper Mount – Rear | OEM |
| Recommended Ride Height – Front | 3.1 in. |
| Recommended Ride Height – Rear | 1.8 in. |
| Ride-Height Adjustable Range – Front | 1.1 to 3.5 in. |
| Ride-Height Adjustable Range – Rear | 0 to 0 in. |
| Recommended Ride-Height Adjustable Range – Front | 2.8 to 3.5 in. |
| Recommended Ride-Height Adjustable Range – Rear | 0 to 0 in. |
| Spring Rate – Front | 10.5 kgf/mm (560 lbs/in) |
| Spring Rate – Rear | 4.5 kgf/mm (224 lbs/in) |
| Spring Free Length – Front | 350 mm |
| Spring Free Length – Rear | 411 mm |
| EDFC Compatible | Yes |
| Quantity | Full Set (Front & Rear) |
| Notes | For X-Reas Equipped Vehicle, Hydraulic Piping Needs to be Removed. |


0.0 Average Rating Rated (0 Reviews)